Tipping Bucket Rain Gauge

Tipping Bucket Rain Gauge was designed for the National Weather Service to provide a reliable, low-cost tipping bucket rain sensor. It has been update and improved with the addition of an inner funnel to even the flow of the rainfall into the gauge, providing better accuracy at higher rainfall rates. It simplicity of design assures trouble-free operation , yet provide accurate rainfall measurement

WMO standard bucket’s top diameter (200mm/8”)

High Accuracy

Good stability

Low resistance

Mesh in the funnel preventing debris

Highly polished stainless steel construction

Horizontal Bubble in bottom 

Material
Stainless steel
Stainless steel
Measuring range
0~4mm/min
0~4mm/min
Accuracy
±≤ 2%(≤0.4mm/min);

±≤ 3% (≤2mm/min);
±≤ 2%(≤0.4mm/min);

±≤ 3% (≤4mm/min);
 
Resolution
0.2mm
0.5mm
Inner diameter
200mm/8inch ±0.3%
Acute angle of cutting edge
40~45°
Insect protection
Steel stainless Mesh
Base
Polished steel stainless304
Diecast aluminium
Output
Reed switch,5 pulse/mm (MaxDC24V,100mA)
Reed switch,2 pulse/mm (MaxDC24V,100mA)
Level control
Bulls eye level adhered
Mounting holes
Three mountings
Discharge control
Straight through flow mechanism
Working temperature
-10～50℃
Working humidity
0%~100%RH
Gross Weight
3.8Kgs
Packing Size
31*31*47cm

Macsensor Tipping Bucket Rain Gauge R60

________________________________________________________________________

คลิ๊ก     

สอบถามข้อมูลเพิ่มเติม :
Tel. 0950726511 
Email : info@rapinstruments.com
FB : https://www.facebook.com/vibrationservices/