YE1311 signal generator is a new type of sweep signal generator which can produce accurate sinusoidal waves, square waves, triangle waves and white noise.
YE1311 signal generator is a new type of sweep signal generator which can produce accurate sinusoidal waves, square waves, triangle waves and white noise. As a general purpose signal source, it is used widely in vibro-acoustic and electronic engineering for vibration modal test, mechanical impedance measurement, microphone, speaker and earphone quality analysis, phase response measurement etc.
Produce sinusoidal wave, square wave, triangle wave and white noise;
Manual and automatic frequency sweep;
Linear and logarithmic selection
LED digital display for output waveform
Meter display for output amplitude
Output waveformsinusoidal, square, triangle and white noise
Frequency range20Hz to 20kHz with adjustable settings for sinusoidal,square,triangle waves;
20Hz to 20kHz with fixed range for white noise;
Frequency meter 10time every one sec.for updating rate at 20Hz to 20kHz
Once a secod for update rating at 2Hz to 2kHz
0.01% for display accuracy
Output voltage range 0 to 20Vrms(continuously adjustable)
Output power 60W ( at 4Ω and 20Hz to 20kHz)
Voltage meter Operation frequency range: 10Hz to 20kHz
Voltage range:0 to 25Vrms
Frequency response ±0.8dB (2Hz to 20kHz sine wave)
Distortion of sine wave≤0.5%
Power Supply 220V±10% at 50Hz
Operation temperature range 0C to 40C;
Storage temperature range -55C to 85C
Maximum humidity 90%R.H.
YE587x series power amplifiers are high efficient power sources to drive vibration shakers for various vibration tests and analyses which are conducted commonly for the product development in various industries such as aviation
JZK series shaker is an electric-mechanical transducer which coverts electric energy into mechanical energy to provide a controlled vibration force which is applied to a test component or structure.