LJTick-RelayDriver

คุณสมบัติสินค้า:

Share

Allows 2 digital I/O lines to each control a relay or other moderate load. The 4-pin design plugs into the standard DIO/DIO/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4. Each DIO controls a switch to ground (i.e. open-collector) that can hold off up to 50 volts and can sink up to 200 mA.

Connect LabJack VS terminal(5V) to the (+) of the load.
RelayDriver connects to the low side (-) of the load.
For more information, see the LJTick-RelayDriver Datasheet.

________________________________________________________________________


คลิ๊ก     

สอบถามข้อมูลเพิ่มเติม :
Tel. 0950726511 
Email : info@rapinstruments.com
FB : https://www.facebook.com/vibrationservices/


Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้